Fire Chief FC1100 Indoor Wood and Coal Furnace

Product Description

A Natural Fuel Heating System

Comfortably Heats up to approximately 5000 square feet*

Whether burning wood or coal, our largest indoor furnace Heat system, the Fire Chief FC1100, will keep you warm during the coldest winter. Fire Chief Indoor Wood and Coal Burning Furnaces are designed for maximum efficiency with our unique 360° Roller Grates (with a lifetime warranty) and a Secondary Combustion Chamber – each Wood furnace is pre-wired for easy installation, constructed of heavy gauge steel (7 ga & 10 ga) plus cast iron front and rear baffles for strength and Quality Heating System durability.

MODEL Specifications



710 lb approx







Maximum Heating Capacity

5000 sq ft

Maximum Btu Output

200,000 approx

Maximum Log Size


Flue Size


Fire Chamber Volume

11.00 cu ft

Plenum Size

12” Round

Door Size

13” X 14”

3-Speed Blower Capacity

1150,1500, 1800 cfm

Warranty – Firebox

5 Year

Warranty – Grates, Castings


  • Quality Heating System Construction – High Grade, heavy (7 & 10) gauge steel is continuously welded for maximum structural strength to make this quality heating system a safe wood furnace.
  • Secondary Combustion Chamber – This quality heating system increases fuel efficiency while re-burning smoke and wood gases before they are vented up the chimney.
  • Cold Air Return/Filter Box – Standard equipment on the FC1100 Fire Chief Wood Furnace. The box filters the return air as well as allowing a connection for a cold air return duct if necessary.
  • Cast Iron Baffle – Directs the combustion air flow below and above the cast iron grates creating the maximum fire temperature for every pound of fuel. This quality heating system cast iron baffle comes with a lifetime warranty.
  • Cast Iron Roller Grates – Designed to roll 360 degrees from either direction, allowing fine ash to drop into ash pit and leaving hot coals in fire box. This quality heating systems cast iron roller grates includes a lifetime warranty.
  • Thermostatically Controlled Draft – Adds convenience with a full range of comfort determined by the temperature setting of your Fire Chief wall thermostat.
  • 3-Speed Blower – This quality heating system motor allows for gentle circulation of air when heating requirements are low and high output when heating requirements are high.
  • Pre-Wired Electrical System – Fully automatic components are pre-wired for your convenience and to reduce electrical installation time and expense.

Standard Features on the FC1100 Fire Chief Wood Furnace Heating System:

Pre-Wired Electrical System
3-Speed Fan with Speed Control
Cold Air Return and Filter Box
(uses standard 25″ X 18″ X 1″ Filters available at most hardware/home centers)

Optional Accessories for the Fire Chief FC1100 Wood Furnace Heating System:

AM-MD12 12” Back Draft Manual Damper

TBS-24 Hot Water Coil with Hole Saw

*The BTU ranges and heating capacity specifications are provided as guidelines only and in no way guarantee the output or capacity of the unit. The actual BTU output depends on the type of fuel being burned and its condition, the draft adjustment and the chimney that the unit is hooked up to. The actual area that the unit will heat depends on factors such as the conditions of the building, heat loss, type of construction, amount of insulation, type of air movement and location of the unit.

Please Note: There may be other models available at the store that are not shown online.